Test cases for Dragon Naturally Speaking + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Dragon Naturally Speaking + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Dragon Naturally Speaking + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for JAWS + Chrome Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for JAWS + Edge Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for JAWS + Firefox Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for JAWS + IE Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for Narrator + Edge Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for Narrator + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Narrator + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Narrator + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for NVDA + Chrome Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for NVDA + Edge Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for NVDA + Firefox Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for NVDA + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for TalkBack + Chrome Test case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe right (or alt+right arrow) (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe right (or alt+right arrow) (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe right (or alt+right arrow) (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe right (or alt+right arrow) (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for TalkBack + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Access (Android) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Access (Android) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (iOS) + Safari Test case: Use Swipe Right (Next item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe Right (Next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Swipe Right (Next item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe Right (Next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Swipe Right (Next item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe Right (Next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Swipe Right (Next item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe Right (Next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for VoiceOver (iOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (macOS) + Safari Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for VoiceOver (macOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (macOS) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Orca + Firefox Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="inline"]#target1` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="inline"]#target1If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `inline` value, applied to input[type="text"] element Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="none"]#target2` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="none"]#target2If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `none` value, applied to input[type="text"] element Examples:
Screen readers will omit any announcements about autocomplete behavior. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="list"]#target3` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="list"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `list` value, applied to combobox role Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `[aria-autocomplete="both"]#target3` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:[aria-autocomplete="both"]#target3If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting aria-autocomplete attribute, MUST convey the `both` value, applied to combobox role Resultunknown pass fail partial
Notes Test cases for Orca + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (iOS) + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Speech Recognition + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Speech Recognition + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Voice Access + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Voice Access + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for iOS Keyboard + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Android Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Android Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.