Test cases for Dragon Naturally Speaking + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Dragon Naturally Speaking + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Dragon Naturally Speaking + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for JAWS + Chrome Test case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch JAWS and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for JAWS + Edge Test case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch JAWS and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for JAWS + Firefox Test case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch JAWS and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for JAWS + IE Test case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch JAWS and IE. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for Narrator + Edge Test case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `*[maxlength]` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Down arrow (Jump to next item (scan mode)) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch Narrator and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for Narrator + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Narrator + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Narrator + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for NVDA + Chrome Test case: Use down arrow (Read next item) to navigate forward to `*[maxlength]` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch NVDA and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for NVDA + Edge Test case: Use down arrow (Read next item) to navigate forward to `*[maxlength]` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch NVDA and Edge. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for NVDA + Firefox Test case: Use down arrow (Read next item) to navigate forward to `*[maxlength]` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch NVDA and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for NVDA + IE The test has not been configured for this combination. Please open a GitHub issue.
Test cases for TalkBack + Chrome Test case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `*[maxlength]` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe right (or alt+right arrow) (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch TalkBack and Chrome. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for TalkBack + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Access (Android) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Access (Android) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (iOS) + Safari Test case: Use Swipe Right (Next item) to navigate forward to `*[maxlength]` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Swipe Right (Next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch VoiceOver (iOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for VoiceOver (iOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (macOS) + Safari Test case: Use VO + Right arrow (Read next item) to navigate forward to `*[maxlength]` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: VO + Right arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch VoiceOver (macOS) and Safari. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for VoiceOver (macOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for VoiceOver (macOS) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Orca + Firefox Test case: Use down arrow (Read next item) to navigate forward to `*[maxlength]` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: down arrow (Read next item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: before target Keyboard focus is: before target Mode is: auto (do not explicitly change the mode) Issue the command: Tab (Read next focusable item) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MAY convey the maximum length when navigating to an input, applied to input[type="text"] element Examples:
screen readers might announce the maximum length when navigating to an input. Resultunknown pass fail partial
Notes Test case: Use <enter text> (enter text) on the target of `*[maxlength]` Launch Orca and Firefox. Navigate to the test page . Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue. Position and configure the screen reader so that the following conditions are metVirtual focus is: target Keyboard focus is: target Mode is: auto (do not explicitly change the mode) Issue the command: <enter text> (enter text) After issuing the command, virtual focus should be: target Record results for the relevant expectations Output Notes If support is hidden behind non-default settings, briefly describe that setting maxlength attribute, MUST convey when the maximum length is reached, applied to input[type="text"] element Examples:
screen readers might announce an earcon when the user tries to enter data beyond the maximum length. screen readers might imply that the maximum length has been reached by not announcing anything when a user tries to enter data (usually the keypress is echoed) Resultunknown pass fail partial
Notes Test cases for Orca + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (iOS) + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Voice Control (MacOS) + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Speech Recognition + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Speech Recognition + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Voice Access + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Voice Access + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Windows Keyboard + Edge The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Mac Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.
Test cases for iOS Keyboard + Safari The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Android Keyboard + Chrome The test has not been configured for this combination. Please open a GitHub issue.
Test cases for Android Keyboard + Firefox The test has not been configured for this combination. Please open a GitHub issue.